When something goes wrong with a heating or cooling system, the first thing most people want is a straight answer about what is likely happening and what it will take to fix it. Call us and that is what you get. The person who picks up knows the trade, can talk through the symptoms on the phone, and will tell you what the visit covers and what it will cost before anything is scheduled.
We handle the full range of HVAC work for homes and properties in Larkfield-Wikiup, from a furnace that stopped lighting to a first-time cooling install in a home that has never had air conditioning. Heat pumps, ductless mini-splits, central AC, gas furnaces, ductwork, thermostats, and indoor air quality equipment all fall within what we do.
Call (707) 892-4623 to get started.
Most HVAC calls come down to a small set of situations. The system runs but the house stays uncomfortable. A room that should be conditioned is always too warm or too cold. The equipment makes a noise it did not used to make, or it stops working entirely. In a town the size of Larkfield-Wikiup, a lot of the housing stock was built before central air conditioning was standard, and systems that have been in place for years sometimes reach a point where the symptoms have been building quietly for a season or two before anyone calls.
We work through the diagnosis before quoting a repair. What the fault turns out to be shapes the price, and we confirm that price before any work is authorized.
Uneven temperatures from room to room are one of the most common complaints we hear. When one part of the house is comfortable and another never is, the cause might be in the ductwork, the equipment sizing, or the way the system is controlled. Zoning systems address this by dividing the home into independently controlled areas, each with its own thermostat or sensor. The result is that a bedroom wing and a main living area do not have to fight over the same setting. We scope zoning work based on the existing system and what the layout of the property actually calls for.
Leaking ducts lose conditioned air before it reaches the room it was meant for. The system runs harder, the house stays less comfortable, and the equipment wears faster. We inspect ductwork as part of a broader system diagnosis and seal or repair sections that are losing air. This work does not require pulling walls or ceilings apart in most cases. The access points are usually in the attic, the crawlspace, or an accessible utility area.
A vent that barely moves air is a different problem from a vent with no airflow at all. Restricted airflow can trace back to a blocked or collapsed duct run, a dirty evaporator coil that has built up enough debris to choke the system, or a blower motor that is not performing at full capacity. Each of those has a different repair path, and the diagnostic works through them in order. We confirm what is causing the restriction before recommending a fix.
Wildfire smoke has become a seasonal reality across this region, and standard HVAC filters were not built to handle the fine particulate matter it carries. A MERV-13 or higher-rated filter captures a substantially greater share of those particles, but the upgrade only works if the air handler can move air through the denser media without losing too much flow. We check compatibility before recommending an approach. Where the existing equipment supports it, we upgrade the filter housing or media. Where it does not, a whole-house filtration unit installed in the duct system is the more appropriate path.
A duct system that was installed correctly and has stayed sealed performs the way it was designed to. One that has developed leaks over the years, or was never properly sealed in the first place, is costing the property in ways that are not always obvious. Conditioned air escapes into unconditioned spaces. The equipment runs longer to compensate. Some rooms never reach temperature while others overheat.
In older homes, duct connections that were sealed with standard duct tape at installation have often failed over time. The tape dries out and pulls away. Flexible duct sections develop tears or kinks. Joints at registers or plenums work loose. None of this is visible from inside the living space, which is why duct issues often go undiagnosed for years.
Duct sealing and repair addresses the leakage without requiring major structural work in most cases. The repair or install scope is priced before the work starts, and we explain what was found during the inspection before any repair is authorized. Give us a call and we will take care of it.
The price depends on what the job actually is. A diagnostic visit for a system that will not start is scoped differently from a full heat pump replacement, and a duct sealing job is priced differently from a thermostat swap. We do not quote a number before we understand the work, and we do not start work before the price is confirmed.
When you call, we talk through what the system is doing and what the visit will cover. The things that move a quote are what the fault turns out to be, what has to be reached to address it, and whether a repair or a replacement is the better answer given the system's condition. We'll explain the diagnosis before any work is authorized.
There are no ballpark figures that apply to every job. What we can tell you is that the scope and the price are settled before anything is scheduled, and nothing is added without your knowledge.
Homes in Larkfield-Wikiup vary widely in age, and older properties present a specific set of HVAC challenges. Equipment that has been in place for many years may have reached a point where parts are difficult to source or where a repair cost no longer makes sense against the remaining useful life of the system. Ductwork that was sized for the original floor plan may never have been extended properly when a room was added or a garage was converted.
The diagnostic visit on an older system covers the condition of the equipment, the integrity of the duct connections, and whether the controls are communicating correctly. From there, we give a clear picture of what a repair addresses and what it leaves unresolved, so the decision about whether to repair or replace is based on the actual condition of the system rather than a general rule about age.
When the ductwork does not match the property as it currently exists, adding supply or return runs, rebalancing the system, or switching part of the home to a ductless configuration are all options worth considering. We scope each situation based on what is actually there.
A lot of homes in this area were built without any provision for central air conditioning. When cooling becomes a priority, the absence of ductwork is not a dead end. A ductless mini-split system conditions individual zones without requiring duct runs through walls or ceilings. The indoor unit mounts on the wall or ceiling of the space being conditioned. The refrigerant line set runs to an outdoor unit through a small penetration in the exterior wall.
Mini-splits make sense in more situations than just homes without ducts. A room addition that was never properly served by the existing system, a detached workspace or garage that needs independent climate control, or a property where extending the existing duct system would be impractical are all situations where a mini-split solves the problem more cleanly than a duct extension would.
We size mini-split systems to the space being conditioned and confirm the scope before installation is scheduled. Heat pumps, furnaces and mini-splits are all within scope, so if the property has a mix of system types, one call covers it. It is worth a look at our page listing every HVAC service before you call.
You do not need to know what is wrong before you call. Describe what the system is doing and the person who picks up will help you work through what the next step looks like.
For routine repair and maintenance calls, we confirm what the visit covers and what it costs before anything is scheduled. We are open every day from 7:30 AM to 10:00 PM. For situations where a property has no heating or no cooling at all, we take those calls on the same basis and work through the schedule to get the visit arranged as quickly as what is available allows.
For properties with tenants or businesses that need to stay operational, we talk through the timing on the call. We do not promise a specific arrival window, but we confirm what the schedule allows and what the visit will involve before the appointment is set.
We serve Larkfield-Wikiup and the surrounding communities throughout Sonoma County. Nearby towns we cover include Fulton, Windsor, Santa Rosa, Forestville, and Graton. If your property is in the Larkfield-Wikiup area or elsewhere in the county and you want to confirm coverage, call and ask.
Residential homeowners, landlords with rental properties, and commercial property managers across this part of Sonoma County all call us for the same range of heating and cooling work. The scope of what we do does not change based on property type.
Standard filters are designed to protect equipment from dust, not to capture the fine particulate matter that wildfire smoke carries. If your system is running during smoke events and the filter is not rated for it, a meaningful share of those particles is passing through and circulating in the living space. A MERV-13 or higher-rated upgrade addresses that, but the right approach depends on whether the existing air handler can support the denser media without a pressure drop that would reduce airflow. Call us and we will confirm what the system can handle before recommending anything.
Both are useful. A photograph of the equipment, particularly the data plate on the unit, gives us the model and serial number, which helps confirm whether the system is within what we work on and whether parts are likely to be readily available. A photograph of the symptom, such as ice on the outdoor unit or water pooling near the air handler, also helps. Send them if you have them, but they are not required to schedule a visit.
The first step is a conversation about whether the home has existing ductwork in good condition, because that determines which installation path makes the most sense. Homes without ductwork are often better served by a ductless mini-split system, which conditions individual zones without requiring new duct runs. Homes with existing ducts in good shape can often have a central cooling system added to the current air handler. Call us and we will talk through which approach fits the property.
Sometimes, depending on the layout of the home and the requirements of the new equipment. Relocating equipment involves additional work for the refrigerant lines, the electrical connections, and potentially the ductwork, and that is scoped as part of the installation conversation. We confirm whether relocation is feasible and what it involves before the installation is scheduled.
A rattle often points to a loose panel, a failing fan blade, or debris that has entered the outdoor unit. A squeal more often points to a belt or a bearing in the blower motor that is starting to wear. Neither is a symptom to wait on, because a component that is starting to fail will eventually stop the system entirely. Describe the noise when you call and we can help narrow down the likely cause.
It depends on the age and condition of the equipment. When both the indoor and outdoor units are relatively new, replacing a single failed component makes sense. When one unit is significantly older than the other, or when the older unit is already showing signs of wear, replacing both at the same time avoids a second installation cost within a short period. We walk through the options on the call so you can make an informed decision.
Yes, significantly. Equipment that is sized correctly, installed with proper refrigerant charge, and commissioned with the thermostat confirmed as communicating will perform better and last longer than equipment that is rushed or improperly sized. We do not cut corners on the installation process because the consequences show up in the system's reliability over time.
Call (707) 892-4623 and describe what is happening with the equipment.
We will ask about the system type, what it is or is not doing, and whether the problem has been building or came on suddenly. By the end of the call, you will have a clear picture of what the visit covers and what it costs. We are available every day from 7:30 AM to 10:00 PM. We'll get your home comfortable again fast.
HVAC service nearby: Forestville, Sebastopol, Healdsburg.
Everywhere else we go is in our full area list.
From a quick repair call to a full system replacement, we cover the heating and cooling work that Larkfield-Wikiup and Sonoma County homes actually need. The list below breaks down each service by what it covers, who it fits best, and a practical note worth knowing before you call. If you have a question about a specific situation, call us and we will talk through what makes sense for your home or building.
| Service Type | What the Service Includes | When You Need It | Helpful Details |
|---|---|---|---|
| Ductless Mini-Split Installation |
| Homes without existing ductwork or rooms that need independent temperature control | Most single-zone installations are completed in a day. Multi-zone systems take longer depending on the number of indoor units and line set routing. |
| Heat Pump Electrification |
| Homeowners moving away from gas heat or replacing an aging furnace and AC together | A heat pump moves heat rather than generating it, which makes it efficient across the mild temperature range that covers most of Larkfield-Wikiup's heating season. |
| HVAC System Installation & ReplacementMost Popular |
| Homeowners, landlords, and property managers replacing aging or failed equipment | Load calculations determine the right equipment size for the space. Undersizing and oversizing both cause comfort and efficiency problems. |
Call us to talk through your situation and get a quote on the work your home or building needs.
(707) 892-4623